The BONT Hybrid Carbon features a lightweight hand crafted carbon fiber base with Leather or Vegan Microfiber and is fully heat moldable! Limited Time Offer 33% Off!!
BONT Hybrid Carbon Boots with Bumper Leather or Durolite - - Limited Time Offer 33% Off!!
The BONT Hybrid Carbon features a lightweight hand crafted carbon fiber base and is fully heat moldable! The Leather version is made with a tough 2mm thick Australian full grain Leather outer skin while the Durolite version is made from strong and durable vegan Durolite microfiber. Comes complete with EVA Innersoles and BONT waxed laces. The BONT Hybrid Carbon boot is available in several stock configurations as shown in the pulldown menu above, they are all abvialble to ship within 1-3 days!
BONT uses carbon exclusively from the world's #1 carbon manufacturer, Toray of Japan. The base of the BONT Hybrid Carbon is made by hand by sandwiching cross weave carbon and uni-directional carbon fiber which is embedded with epoxy thermo setting resin. The fibers are hand laid in the matrix according to the strain they will have to bear.
Bont boots are manufactured by hand in a process where they build the boot from the inside out by hand laying the carbon of fiberglass around the last (plastic foot). This method of manufacturing is extremely time consuming compared to the traditional method of quad boot manufacturing which is done by gluing the upper to the pre made base. BONT's method results in a much stronger and lighter structure.
The Hybrid is made with high density closed cell memory foam. This padding will not deform over time or retain water from sweat or wet surfaces.
BONT Boot Sizing
It's critical to get this part right prior to ordering! This size chart shows the exact size of the foot form or 'last' that is used to create each specific size of BONT boots. As a basic rule, most skaters like their boots to be 3-4mm longer than the last. This allows for your feet to grow in length when the boots are tightened. If you like your boots super tight, then just add 1-2mm but be warned, your toes will touch the end and possibly be scrunched. To find your size, place a tape measure on a flat surface up against a wall. Stand on the tape measure with your heel against the wall. If you use a ruler, take into consideration that most rulers have a gap where there are no measurements. Look down and take the measurement from your longest toe. Then use the MM scale on the size chart to find your size...
Here are some examples of mm sizes and the boot size that BONT recommends:
253mm + 4mm you should order size 6.5
258mm + 4mm you should order size 7
273mm + 4mm you should order size 9
291mm + 4mm you should order size 11
Ready to Order your New BONTS?
If you are confident you have selected the right BONT size for yourself, by this measuring method or maybe you have had BONT boots before or tried a friends on, or tried actual BONT sizing stock somehwere in person (available by appointment at Rollerskatin.ca) then you are all set to order your BONT boot or skate! if you want to doublecheck everything with us to make sure you order the right size please send an email to: CustomerService@RollerSkatin.ca
• ALSO: Ask about Other UPGRADE & SUBSTITUTION Options; other Plates, Wheels and Bearings