ROLL-LINE LINEA Inline Figure Skate Conversion Set Complete

ROLL-LINE LINEA Inline Figure Skate Conversion Set

The Linea Inline plate by Roll-Line is the standard for a quality inline plate, especially one that can also simulate the feel of an ice blade. The six positions of the exclusive Roll-Line rockering system provides the precise feel that each skater desires. And the unique inclination of the toe stop provides the perfect angle for the execution of jumps and spins.

Included: Wheels, 8 mm Abec 7 bearings, bearing spacers, power wedges, toe stops, posterior protection kit, and wrench set/ “tool kit” are included.

• Sized in inches, like an ice blade, 7.25″ to 11.25″ available
• Can be mounted on ice or roller boots, sizes 190-300
• Power Wedges are required to mount to ice boots and are included with the Linea plate.

Sizing

Sized exactly like an Ice Blade - Select your LINEA Frame exactly as per your ice blade - plate size is total mounting length in INCHES.

Available Sizes: 8 – 8 ½ – 9 – 9 ¼ – 9 ¾ – 10 – 10 ¼ – 10 ¾ – 11 ¼.

Rockering System

Rotate the medial mechanism, to obtain a different setting of the central wheel with the goal of replicating the same rockering used on ice blades:

• Possibility to position the central wheel in a more rearward or frontward position.
• The wheel may be also moved up or down.
• Up to 6 different setting options to custom create the exact feel of an Ice Blade

Wheels + Bearings Included

A specific or recommended diameter of wheels is suggested depending on the size of plate chosen as seen below. Compared to similar products of other brands, the LINEA skate frames can accommodate bigger wheels. A bigger wheel is faster, which translates to more speed, better performances and higher jumps! The recommended size of wheel with ABEC-7 bearings are included with your LINEA set, along with a tool kit!

Toe Stops Included

The unique inclination of the toe-stop offers the best angle for performing jumps and spins. The super professional AMBRA toe-stops are provided with LINEA skate frames and a double screw fastening system ensures an optimal locking of the toe-stop. The Toe Stop replicates the feel of the Toe Pick for Jumping.

Power-Wedges Included

Power-Wedges are recomended to be installed at the front of the boot between the frame and the toe of the boot if the foot naturally rises at the toe. The Power Wedge follows the natural rise of the boot at the front and will ensure perfect contact between frame and boot and not deform the boots.

Mounting Kit Options

To properly mount Linea frames, we recommend purchasing one of these kits:

• Kit 1: Mounting to an EDEA Ice and Roller Boot (Power Wedge not required for Jazz or Suono Only)
• Kit 2: Mounting to a Traditional Leather Ice Boot